calaisturbo.com.au

calaisturbo.com.au (http://www.calaisturbo.com.au/index.php)
-   New South Wales (http://www.calaisturbo.com.au/forumdisplay.php?f=30)
-   -   Grunters new toy ( my bad ) (http://www.calaisturbo.com.au/showthread.php?t=259312)

grunter01 06-12-12 04:15

Quote:

Originally Posted by vl4skids (Post 2980507)
Lol 2.2 60ft. That thing has a 1.4 in it eeeeeaaasssy. Get pics up of the shell asap!

haha yeah i would love to see that on some chinese **** $110 tyres haha....

---------- Post added 06-12-12 at 05:16 ----------

Quote:

Originally Posted by 7FOUR7 (Post 2980522)
can't wait to see the new one!

Was hoping to see 135mph on 18s haha

---------- Post added 06-12-12 at 01:59 ----------

ps 128 is still awesome on 18s :P

yeah it would have been heaps more mph but couldnt stand on it as it would just wheel spin....
I iwll get the pics up when i pic the new shell up guys, which will be just before new year.....

grunter01 17-12-12 20:36

ok guys new toy has been arranged for pickup on the 28th of dec,
I will be parting out the parts i do not need....

Full roll cage including under dash bar, taxi bar, side intrusions, complete bar out into boot to retain parachute mount.
Parachute
Sheet metal dash holding Stewart Warner 50mm Guages
VOLTS
WATER TEMP
OIL PRESSURE
BOOST
TRANS TEMP
FUEL PRESSURE
Dash also holds Autometer Tacho shift light and low oil pressure light
INNOVATE LM-1 METER, - FOR SALE
INNOVATE LMA-3 MULTI SENSOR INPUT MODULE, - FOR SALE
3spd shifter - FOR SALE
mounted chute lever
6AL MSD ignition - FOR SALE
painless control switch panel
single RCI One piece moulded drivers seat and padded cover,
75mm race harness,
Morroso Oil Accumalator,
45ltr Fuel cell, - FOR SALE
2 x Bosch 044 fuel pumps - FOR SALE
EFI Fuel Regulator. - FOR SALE
9" diff
disc brakes
35 spline axles
Strange alloy carrier 4.11's full spool,
WELD Racing wheels PRO STARS [Front] 24 x 4.5 x 15 with M/T Front runners [Rear] 26 x 11.5 x 15 with M/T ET STREETS.
Single 3.5" piece custom made Tailshaft with strange uni joints.

http://i403.photobucket.com/albums/p...EDE6650F2A.jpg
http://i403.photobucket.com/albums/p...EDF0DBF5A9.jpg
http://i403.photobucket.com/albums/p...EDF4AB2A3B.jpg
http://i403.photobucket.com/albums/p...EDF8780046.jpg

vl4skids 17-12-12 20:41

Which shell is it? What sort of weld wheels, and a backspacing and stud pattern if possible. What sort of chute? Pm me if you like mate

grunter01 17-12-12 20:45

pics are up now man... i will get more once i pic it up

grunter01 28-12-12 19:16

Ok just picked up the new roller, need some things like rear lights and garnish and so on but a good starter...

http://i403.photobucket.com/albums/p...8BB12B6E5B.jpg
http://i403.photobucket.com/albums/p...8B9737803E.jpg
http://i403.photobucket.com/albums/p...8BA1C47116.jpg
http://i403.photobucket.com/albums/p...8BA824E1A7.jpg
http://i403.photobucket.com/albums/p...8BC49CBBC8.jpg

---------- Post added 28-12-12 at 19:17 ----------

http://i403.photobucket.com/albums/p...8BBEFF4069.jpg

RB-GEM 28-12-12 20:05

Happy with the new toy Kirk ?

grunter01 28-12-12 20:33

To be honest George I havent really looked at it properly yet.... You put the diff in yet?

wlk21 29-12-12 17:31

how much you want for the 044's? and willing to post?

RB-GEM 29-12-12 20:27

Not yet mate . Still have to proof coat under the car first , might do that tomorrow .

grunter01 29-12-12 20:53

Wanna get it home first mate before I go saying anything

grunter01 19-01-13 20:57

just some pics on what the cars are up to atm, chilling in the shed.... Got a 9" 35spline for the street car for the moment to get her going again... Once again i am thinking of going a different way with my car ( i have issues with decision making i think ) so i am thinking of selling the drag roller and just doing my other car.... If someone is interested please let me know...
http://i403.photobucket.com/albums/p...67BD6FB536.jpg
http://i403.photobucket.com/albums/p...6858D12853.jpg
http://i403.photobucket.com/albums/p...68529EFAEF.jpg
http://i403.photobucket.com/albums/p...6848D795B0.jpg
http://i403.photobucket.com/albums/p...684139EC6F.jpg
http://i403.photobucket.com/albums/p...683AD535A9.jpg
http://i403.photobucket.com/albums/p...6835EA63C4.jpg
http://i403.photobucket.com/albums/p...682F6081C6.jpg
http://i403.photobucket.com/albums/p...6829CB7838.jpg
http://i403.photobucket.com/albums/p...68249AFBD6.jpg
http://i403.photobucket.com/albums/p...682013AB6A.jpg
http://i403.photobucket.com/albums/p...68182ABFA9.jpg
http://i403.photobucket.com/albums/p...68119DB099.jpg

Cooler pipe seem welded on now...
http://i403.photobucket.com/albums/p...680A72EB08.jpg
http://i403.photobucket.com/albums/p...6802CD4503.jpg
http://i403.photobucket.com/albums/p...67FC4BC932.jpg
http://i403.photobucket.com/albums/p...67F6C13805.jpg
http://i403.photobucket.com/albums/p...67F19E31E5.jpg
http://i403.photobucket.com/albums/p...67EB56F4AA.jpg
http://i403.photobucket.com/albums/p...67E5AB4552.jpg
http://i403.photobucket.com/albums/p...67E042B07F.jpg
http://i403.photobucket.com/albums/p...67DB5A3171.jpg
http://i403.photobucket.com/albums/p...67D6407A2A.jpg
http://i403.photobucket.com/albums/p...67CE93C9DE.jpg
http://i403.photobucket.com/albums/p...67C93BF19A.jpg
http://i403.photobucket.com/albums/p...67C27EBAFE.jpg

vl4skids 19-01-13 21:56

Why is this happening mate? 40psi, bigger tyre, 8's all day drive it on the street thankyou!

grunter01 19-01-13 22:52

just thinking of buying a finished shell painted and trimmed and later on caging it and mini tubbing.... If i sell this roller i have some cars in mind i want to buy. There is nothing wrong with the roller only needs ecu, trans, engine... it even comes with andra logs books.

---------- Post added 19-01-13 at 23:54 ----------

also if i do get the new shell im sure you will like it....

Nukz 19-01-13 22:55

Price for roller?

grunter01 20-01-13 00:24

PM me an offer

---------- Post added 20-01-13 at 10:45 ----------

HERE IS A RUN DOWN ON THE CAR AND WHAT IT HAS, CALL OR PM IF YOU ARE INTERESETED

Full chromoly 6 point roll cage including under dash bar, taxi bar, side intrusions, Re-enforcment bars to rear seat, complete bar out into boot for parachute mount.
DIEST Parachute with lever at shifter
NOS bottle holder with lines
Extinguisher
Full clip on removable steering wheel with transbrake button
Aluminium Sheet metal dash holding Stewart Warner 50mm Guages
VOLTS Gauge
WATER TEMP Gauge
OIL PRESSURE Gauge
BOOST Gauge
TRANS TEMP Gauge
FUEL PRESSURE Gauge
Dash also holds Autometer Tacho shift light and low oil pressure light
INNOVATE LM-1 METER,
INNOVATE LMA-3 MULTI SENSOR INPUT MODULE
Precision 3spd shifter
6AL MSD ignition
MSD Blaster coil
Transmission cooler with lines
Toggle control switch panel
Single piece JAZ pro stock drivers seat and Vinyl padded cover,
75mm race harness,
Morroso Oil Accumalator with Braided lines to engine bay
45ltr Fuel cell,
2 x Bosch 044 fuel pumps, brackets, check valves
EFI Fuel Regulator
FE2 suspention
Crysler shocks
Boxed trailing arms
9" diff
Disc brakes
35 spline axles
1/2" wheel studs
Strange alloy carrier 4.11's full spool,
WELD Racing wheels PRO STARS [Front] 24 x 4.5 x 15 with M/T Front runners [Rear] 26 x 11.5 x 15 with M/T ET STREETS.
Single 3.5" piece custom made Tailshaft with strange uni joints.
Brand new front bar
Bonnet pins
Shaven door locks

kirk 0410757949

---------- Post added 20-01-13 at 18:26 ----------

DID abit of work to the car today, Just put the new 9" in, also put the tail shaft and strengthend lower control arms then put in the cooler piping, And was that a fcuking prik of a job. Now just need to get the head re-torqued down then 35-40psi here we come. So hopefully have that done and retuned in the next 2 weeks. Also i think the diff has been shortened abit but wont know till i get new 1/2" wheel nuts.
http://i403.photobucket.com/albums/p...995F2C7AB6.jpghttp://i403.photobucket.com/albums/p...9955A766D7.jpghttp://i403.photobucket.com/albums/p...994AE2F566.jpghttp://i403.photobucket.com/albums/p...99446E1CCE.jpg


Also this is the innovative logger that comes with the roller.
http://i403.photobucket.com/albums/p...9969650CD9.jpg

---------- Post added 20-01-13 at 18:57 ----------

THE ROLLER HAS RUN A BEST OF 9.06 @ 151mph. I want 8k for the car as it is which is ready to rumble with a box, engine, ecu.... If no one is interested in this thread i will advertise it. I know the car is worth this easily

grunter01 02-02-13 09:38

ok shell has a deposit on it now so it will go in the next 2 weeks. I am going to spend the money on a car for the misses and just build mine then i know its done properly. I have been looking at prices on getting it tubbed, 4 linked, coil overs, cage done and will slowly chip at it all. The car has had some bits fixed on it while off the road and should be on the road by the end of the weekend and also get more power put in it for power cruise next week.
- Welded a bead on the intercooler piping
- replaced the over flow bottle cap as was causing water system to pressurise
- Replaced BW with 9" 35spline diff
- Single 3.5" piece Mark williams tail shaft
- Billet uni caps
- -10an teflon return lines and fittings
- Transbrake button plate on the carbon shifter
- replaced brake line block
- Strengthened trailing arms
- 21psi base pressure waste gate springs

I think thats all i have done but cant remember, but hopefully will be going this weekend and will do a victory powerskid out the front if the rain ****s off...

vl4skids 02-02-13 10:02

I hope to see a video of this victory powerskid you talk of!

RB-GEM 02-02-13 12:07

Terrorise your neighbours some more lol . They must love you Kirk

grunter01 02-02-13 14:32

Yeah they do

grunter01 07-02-13 15:43

Car is finally alive again and load up on the trailer and getting retuned tonight so i hope it gets a better result then before.

CHRGD6 08-02-13 10:27

Is the white roller the old Ben Visconte (sp.?) shell?

vl4skids 08-02-13 10:37

Quote:

Originally Posted by CHRGD6 (Post 2994108)
Is the white roller the old Ben Visconte (sp.?) shell?

Did that car end up getting tubbed?

grunter01 08-02-13 14:46

No to sure to be honest? the shell is being picked up tomorrow and is going to adelaide.

Coop450 11-02-13 18:12

I heard this old girl may have made 80hp per wheel nut. Might struggle to do a power skid at powercruise but we will see.

vl4skids 11-02-13 21:06

Quote:

Originally Posted by Coop450 (Post 2994844)
I heard this old girl may have made 80hp per wheel nut. Might struggle to do a power skid at powercruise but we will see.

1600hp? Lol. Did it make 800?


All times are GMT +10. The time now is 01:08.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Ad Management plugin by RedTyger