View Single Post
Old 06-02-13, 23:27   #44
hypergear
Advertiser
 
Join Date: 11-02-07
Location: Melbourne, Brunswick
Car:
Trader Rating: (1)
The ATR43SS1 is $1250 including braided oil line. That will be in .64 turbine and .60 comp, 14psi actuated.

---------- Post added 07-02-13 at 00:30 ----------

Add in some further updates. That is results from our SS1PU and SS2 BB. All on E85 high mount externally gated Rb25det.



SS1PU maxed out at 322rwkws with peek boost of 20psi. This turbo is super responsive as usual.





The Roller bearing SS2. I believe This is probably the best turbocharger that with the perfect balance of power and response for a stock Rb25det. brilliant on road driveability. It maxed at 374rwkws with 22psi of boost.




This is SS2 Ball Bearing V SS2 bush bearing. Please note today's dyno run used an proper externally gated setup while the older run had an external gate plumb back setup. There shouldn't be any differences in top end assume both runs are based on the same setup. On the same time, evidence in differences between plumb back and atmospheric ventilation.






Reading below is the overlay of the most recent turbochargers tested. contains the ATRSL220.5G, SS1PU, STDSL220G, and SS2BB.


hypergear is offline   Reply With Quote