CalaisTurbo New Tags
User Name: Password:

Go Back   calaisturbo.com.au > Readers Rides > Other Readers Cars
Calais Turbo Advertising

Reply

 

Thread Tools
Old 08-04-12, 19:31   #1
stock6
Player
 
stock6's Avatar
 
Join Date: 05-06-08
Location: Melbourne, Eastern Suburbs
Car:
Trader Rating: (0)
Vk Grp A 355T replica

i thought i might start up a thread on my new project. i have been a member for a few years now, just never started many threads.my build is a group A replica, with a single turbo 355 holden. i just got it tuned last week and it made 413 RWKW and 1528 Nm @ 12 psi. i just have to finish the reverse scoop and the lower bar, then it will be finished.

the setup is as followed:
Engine
holden vt virgin block
vt heads ported with yt rockers
srp forged slugs
eagle h-beam rods
crankshaft rebuilders crank
pavtec girdle
asr sump
custom solid camtech cam
arp main and head studs
single plane high rise torque power manifold
Jake Edwards 750 blow thur carby and hat
600*400*90 intercooler 3" piping
GT4202 turbo with 1.15 rear houseing

Fuel system
aeromotive A1000 pump
aeromotive A2000 reg
Aeromotive fuel filter
-10 supply and return lines
about 60 ltr fuel cell

drive train
Powerglide with trans brake and tce 3500 stall
9 inch 3.5 with full spool
31 spline axles

ignition system
Msd dizzy
Msd leads
Msd 6al-btm



stock6 is offline   Reply With Quote
Old 09-04-12, 12:01   #2
leb vlt
Roll Cage Territory
 
leb vlt's Avatar
 
Join Date: 20-02-07
Location: Perth, north
Car: 10.8 @ 121 mph
Trader Rating: (62)
Send a message via MSN to leb vlt
More pix ASAP!!!!
__________________
Adrenaline Performance & fabrication 9726 2322

HEKTIK FENCING, hit us up for a free quote 0403307549
leb vlt is offline   Reply With Quote
Old 09-04-12, 12:52   #3
brawlr
still a player
 
brawlr's Avatar
 
Join Date: 13-07-07
Location: Melbourne, northern suburbs
Car: HBD vy ss / HZ v8 tonner
Trader Rating: (11)
+1 that's hell cool
__________________
R.I.P. Trent Bond 3/8/88 - 13/9/08
brawlr is offline   Reply With Quote
Old 09-04-12, 14:24   #4
stock6
Player
 
stock6's Avatar
 
Join Date: 05-06-08
Location: Melbourne, Eastern Suburbs
Car:
Trader Rating: (0)
here are some more pics. its not finished yet, still need to get the 4" reverves scoop on and the lower section of the bar.





.
stock6 is offline   Reply With Quote
Old 09-04-12, 14:51   #5
7FOUR7
Be like me
 
7FOUR7's Avatar
 
Join Date: 20-10-02
Location: NSW, Newcastle
Car: VZ SS Thunder 6.0- Another vl soon
Trader Rating: (26)
Send a message via ICQ to 7FOUR7 Send a message via MSN to 7FOUR7
that's ****in boss!
__________________
black on black on black.
7FOUR7 is offline   Reply With Quote
Old 10-04-12, 16:36   #6
PROGMH
Moderator
 
PROGMH's Avatar
 
Join Date: 16-10-05
Location: VIC, VIC
Car:
Trader Rating: (26)
Cooool as all ****.
I thought power would be in way way earlier than almost 5500 with that many cubes. What's it like to drive?
PROGMH is offline   Reply With Quote
Old 10-04-12, 20:02   #7
stock6
Player
 
stock6's Avatar
 
Join Date: 05-06-08
Location: Melbourne, Eastern Suburbs
Car:
Trader Rating: (0)
Quote:
Originally Posted by PROGMH View Post
Cooool as all ****.
I thought power would be in way way earlier than almost 5500 with that many cubes. What's it like to drive?
It makes the power a lot earlier but that's where he ramped it up from. Drive really nice around town, only has a 3500 convertor in it. But it's useless without semi under its bum. I haven't driven to much as its got no scoop and I don't want to get ****, before I can enjoy it.
stock6 is offline   Reply With Quote
Old 22-04-12, 21:14   #8
stock6
Player
 
stock6's Avatar
 
Join Date: 05-06-08
Location: Melbourne, Eastern Suburbs
Car:
Trader Rating: (0)
finially got the scoop and lower bar back today. looks good again. down side is that i have to mod my sreamer pipe as it hits the bar.



stock6 is offline   Reply With Quote
Old 23-04-12, 23:45   #9
FAQFPV
SCREAMER
 
FAQFPV's Avatar
 
Join Date: 07-03-07
Location: VIC, northern suburbs
Car: Daily wh gen3 - Grandpa's vn [CVN-747]
Trader Rating: (14)
now thats ****ing cool top job mate hope to see it in the flesh one day.
__________________
Quote:
Originally Posted by vltrb-0 View Post
spools ftw they never get boring

lsd's are for towing caravans
FAQFPV is offline   Reply With Quote
Old 24-04-12, 00:53   #10
12maneym
Gold Members
 
12maneym's Avatar
 
Join Date: 28-07-04
Location: NSW, Albury
Car: lw5 berlina turbo wagon A9Y wagon turbo
Trader Rating: (5)
Send a message via MSN to 12maneym
this things is sweet pure filth!
12maneym is offline   Reply With Quote
Old 25-04-12, 12:25   #11
stock6
Player
 
stock6's Avatar
 
Join Date: 05-06-08
Location: Melbourne, Eastern Suburbs
Car:
Trader Rating: (0)
I finished strengthening and boxing my lower arms. turned out really good. now im hoping that it dosent rain on saturday and it off t calder.



stock6 is offline   Reply With Quote
Old 25-04-12, 17:17   #12
DA HOON
do it with junk, not $$$
 
Join Date: 25-08-02
Location: NSW, Wollongong
Car: hacked up vr with ls1
Trader Rating: (1)
Send a message via MSN to DA HOON
looking good mate, love blow thru turbo v8s

can i ask what jake charged for the carb and hat? hat looks very similar to ev hat. pm me if you want. cheers

Steve
__________________
she right, she registered...
DA HOON is offline   Reply With Quote
Old 26-04-12, 21:03   #13
stock6
Player
 
stock6's Avatar
 
Join Date: 05-06-08
Location: Melbourne, Eastern Suburbs
Car:
Trader Rating: (0)
Hey mate it was a csu carby and hat. Jake just redeed the metering blocks, some didnt cost to much. Sorry I don't have the receipt around at the moment.

---------- Post added 27-04-12 at 17:11 ----------

Here is my favorite pic.
stock6 is offline   Reply With Quote
Old 28-04-12, 22:41   #14
stock6
Player
 
stock6's Avatar
 
Join Date: 05-06-08
Location: Melbourne, Eastern Suburbs
Car:
Trader Rating: (0)
Thanks mate

Just got back from Calder. What a head ****. Lol. First my fuel line short out a cable and spilt the line, so had to block it off. First run **** burn out, just spun the tyres and throw the alt belt. Second run had to run on battery power, got a good skid and run sic off the line. And run a 10.03 @ 139 mph.


---------- Post added 28-04-12 at 22:50 ----------

That's with all street trim, tyres , exhaust and full interior.
stock6 is offline   Reply With Quote
Old 28-04-12, 23:22   #15
LAZY6
Official Member
 
LAZY6's Avatar
 
Join Date: 23-09-04
Location: VIC, .....
Car: FG XR6 Turbo
Trader Rating: (0)
That looks tough! well done on the time too!
LAZY6 is offline   Reply With Quote
Old 29-04-12, 02:25   #16
leb vlt
Roll Cage Territory
 
leb vlt's Avatar
 
Join Date: 20-02-07
Location: Perth, north
Car: 10.8 @ 121 mph
Trader Rating: (62)
Send a message via MSN to leb vlt
Love everything about this car
__________________
Adrenaline Performance & fabrication 9726 2322

HEKTIK FENCING, hit us up for a free quote 0403307549
leb vlt is offline   Reply With Quote
Old 29-05-12, 22:48   #17
DA HOON
do it with junk, not $$$
 
Join Date: 25-08-02
Location: NSW, Wollongong
Car: hacked up vr with ls1
Trader Rating: (1)
Send a message via MSN to DA HOON
congrats on the times mate. can only get better from here now
__________________
she right, she registered...
DA HOON is offline   Reply With Quote
Old 29-09-12, 16:42   #18
stock6
Player
 
stock6's Avatar
 
Join Date: 05-06-08
Location: Melbourne, Eastern Suburbs
Car:
Trader Rating: (0)
well its been awhile since i have been on hear. ood news is that the bottom end is a salibras at the moment getting a 4 bolt convertion and grout. hopeing to get it together and new tune in by c4c.
stock6 is offline   Reply With Quote
Old 09-11-12, 08:09   #19
stock6
Player
 
stock6's Avatar
 
Join Date: 05-06-08
Location: Melbourne, Eastern Suburbs
Car:
Trader Rating: (0)
Will I Finially got my bottomend back from salibra, all ready to go. Looks mad. In the end when a bit nuts, 4bolt mains, front steal cap and grout up to the plugs. Will be going to push some more boost in her and see how much power we can make.


stock6 is offline   Reply With Quote
Old 09-11-12, 08:25   #20
NZ EVLHSV
Player
 
NZ EVLHSV's Avatar
 
Join Date: 11-07-06
Location: NZ, Auckland
Car: Gen-F GTS
Trader Rating: (0)
Amazing looking car, looks like you've done a great job with everything!
NZ EVLHSV is offline   Reply With Quote
Old 17-11-12, 14:42   #21
BigM22
Booooooooosssssttt!
 
BigM22's Avatar
 
Join Date: 15-08-12
Location: Melbourne, S.E Suburbs
Car: 87 Exec, BF Falcon (Daily)
Trader Rating: (0)
Saliba does a damn good job
Props to you mate, this looks like a pretty trick build
__________________
Holden: Australia's Driving Future.... Erm not for much longer
BigM22 is offline   Reply With Quote
Old 17-11-12, 19:19   #22
stock6
Player
 
stock6's Avatar
 
Join Date: 05-06-08
Location: Melbourne, Eastern Suburbs
Car:
Trader Rating: (0)
Thanks guys

I should have it put back together in a couple of weeks
stock6 is offline   Reply With Quote
Old 26-03-13, 07:54   #23
Epitaph
Y U MAD THO?
 
Epitaph's Avatar
 
Join Date: 15-10-02
Location: Melbourne, South Eastern Suburbs
Car: BF XR8 Ute
Trader Rating: (14)
hows this car going?
Epitaph is offline   Reply With Quote
Old 02-04-13, 15:10   #24
PROGMH
Moderator
 
PROGMH's Avatar
 
Join Date: 16-10-05
Location: VIC, VIC
Car:
Trader Rating: (26)
10.0 on the first pass haha, that's awesome.
PROGMH is offline   Reply With Quote
Old 01-07-13, 21:12   #25
stock6
Player
 
stock6's Avatar
 
Join Date: 05-06-08
Location: Melbourne, Eastern Suburbs
Car:
Trader Rating: (0)
finally got her up and running again. Hopefully can get her tuned this week. changed a few things. changed the coil to a blaster and the leads to ice 9mm. https://www.youtube.com/watch?v=SH6j...e_gdata_player
stock6 is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time now is 09:45.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Ad Management plugin by RedTyger