Calais Turbo

sohc2 · 06-03-14, 20:02

Just wondering what brand and type of harness everyone is using for sub 10 second passes.

For a 5 point harness do you have to weld a plate onto the floor with a lug on it?

Couldnt find much info on the site about them.

Cheers
Dane

EVLRB30 · 06-03-14, 21:03

I've just got proforce 5 point harnesses from Vpw for the floor mount you need a 75x75mm by 3mm thick plate weld a nut to it and drill a hole in your floor pan sit the plate underneath and screw your anchour through from the top job done

sohc2 · 06-03-14, 21:39

Cheers mate. So the actual plate does not need to be welded to the underside of the floor?

EVLRB30 · 07-03-14, 06:39

Nope

sherman89 · 07-03-14, 14:36

You can buy the plates with nuts already on from revolution racegear, like $4, eyelets are only a few dollars too. I have a willans 5 point, it was too expensive but willans is badass and the release mechanism is easy.

06-03-14, 20:02	#1
sohc2 10.6@127mph Join Date: 10-07-07 Location: NSW, South Coast Car: 10 second sleeper Trader Rating: (21)	Harnesses Just wondering what brand and type of harness everyone is using for sub 10 second passes. For a 5 point harness do you have to weld a plate onto the floor with a lug on it? Couldnt find much info on the site about them. Cheers Dane __________________ lllMAATOUKS RACING Making dreams become a reality!

06-03-14, 21:03	#2
EVLRB30 9.11@153.11 33psi Join Date: 29-01-09 Location: SA, country Car: Berlina turbo Trader Rating: (4)	I've just got proforce 5 point harnesses from Vpw for the floor mount you need a 75x75mm by 3mm thick plate weld a nut to it and drill a hole in your floor pan sit the plate underneath and screw your anchour through from the top job done __________________ 2013 VL Turbo Nationals PRO VL champion

06-03-14, 21:39	#3
sohc2 10.6@127mph Join Date: 10-07-07 Location: NSW, South Coast Car: 10 second sleeper Trader Rating: (21)	Cheers mate. So the actual plate does not need to be welded to the underside of the floor? __________________ lllMAATOUKS RACING Making dreams become a reality!

07-03-14, 06:39	#4
EVLRB30 9.11@153.11 33psi Join Date: 29-01-09 Location: SA, country Car: Berlina turbo Trader Rating: (4)	Nope __________________ 2013 VL Turbo Nationals PRO VL champion .

07-03-14, 14:36	#5
sherman89 Player Join Date: 18-07-05 Location: Brisbane, Southside Car: 'ONO 747' 8.81@157 Trader Rating: (7)	You can buy the plates with nuts already on from revolution racegear, like $4, eyelets are only a few dollars too. I have a willans 5 point, it was too expensive but willans is badass and the release mechanism is easy. __________________ NEXT UP PERFORMANCE - 0438 383 876