![]() |
#1 |
Player
|
candy apple red 30/26 build!!!
So i got this peice of **** as a mock up
![]() So i didnt get a scratch on this baby ![]() Well ive started purchasing some go fast bits Engine: RB30 s2 block being machined and all the rest atm -spool H beam rods -CP pistons -romac balancer ![]() -Hypertune plenum only running single rail atm but have the option to run 2. credit to hypertune for the fine piece of work. -only baby turbo atm till i get used to the power precision 6262 .84 rear dual BB ceramic -6 boost manifold -nitto oil pump ![]() ![]() ![]() ![]() So this is the motor dummy fitted to the **** car. Going to be doin all the fab in this one. going water to air intercooler. All piping and covers will be dipped in carbon. Rather extensive head work done by the man himself Mark at Godzilla CNC ported 1mm+valves etc - tomei procams 10.25 lift by 270 im pretty sure - supertech EVERYTHING valves double springs etc titanium retainers, bronze guides ![]() ![]() ![]() ![]() Drivetrain -9" housing no center yet ![]() ![]() ![]() Running chev 2 speed transbrake some new brakes ![]() So ive thrown this together really quick will update it properly wen i get the time ![]() ![]() |
![]() |
![]() |
![]() |
#3 |
10:3 @129mph
![]() |
Sweet as mate looking like will b a Weapon hope il also make to power cruise this sept
__________________
“No, no, no. There's no such thing as cheap and cheerful. It's cheap and nasty & expensive and cheerful.” |
![]() |
![]() |
![]() |
#5 |
Player
|
[IMG]<a href="http://imgur.com/BZNKZ1a"><img src="http://i.imgur.com/BZNKZ1a.jpg" title="source: imgur.com" /></a>[/IMG]
---------- Post added 09-06-15 at 15:49 ---------- ![]() ![]() Some custon engine mounts slowly getting there, this is all done in the dummy car will post up some pics of the 2 speed mounts soon pretty impressive. |
![]() |
![]() |
![]() |
#8 |
Player
|
We can put it on the front where the intercooler would go. Will be buying the tank and making the radiator to suit so will not be a big deal. Might be able to fit it in front of the water to air cooler. Went with the water to air cooler so we didn't have to cut any holes for piping should look pretty sweet wen it's done.
---------- Post added 16-06-15 at 09:28 ---------- Any positive feedback or ideas is welcome, after all that's y I'm on here to share ideas. |
![]() |
![]() |
![]() |
#9 |
Gold Members
![]() |
nice job, coming along good. can I ask what the engine mount rubbers are from
__________________
10.6 manual radials... |
![]() |
![]() |
![]() |
#10 |
.................
![]() |
Looks awesome mate, what turbo do you plan on running after the 6262?
|
![]() |
![]() |
|
![]() |
#11 | ||
Player
|
Quote:
---------- Post added 16-06-15 at 19:55 ---------- Quote:
![]() ---------- Post added 16-06-15 at 19:55 ---------- the 6262 good for 700 so hopefully get close to that ... |
||
![]() |
![]() |
![]() |
#14 |
Player
|
![]() ![]() ![]() ![]() ![]() ---------- Post added 26-02-17 at 01:26 ---------- ![]() ![]() ![]() ![]() http://i.imgur.com/Jj23akGh.jpg ---------- Post added 26-02-17 at 01:27 ---------- water to air intercooler tank on one side and radiator res/over flow on the other side |
![]() |
![]() |
![]() |
#16 |
Here since 2002
![]() Join Date: 20-01-08
Location: SA, Adelaide
Car: 1D008D LW5 MX7 BT1, Vl “Calais MOCK” sl Turbo 5speed, VZ
Trader Rating: (0)
|
Great work.
I'd love to do a 30/26 combo in my blue one. Nearly started it years ago with buying parts but then sold the car and bought back again (maybe one day). Stupid question coming, but with having a fuel tank in the boot, is the sound of fuel splashing around more prevalent than a normal tank? Or are there special baffles or dividers inside them to counter act this?
__________________
John Moyle Motor Engineering 1A Collins St, Enfield SA 5085 (08) 8269 3214 http://www.johnmoylemotorengineering.com.au/ Last edited by calaist5; 03-05-17 at 00:38. |
![]() |
![]() |
![]() |
Thread Tools | |
|
|