Calais Turbo

HEADAKE · 07-07-04, 14:33

i just put my new head on wif diffrent cam in it and my cooler will be on soon but my timming is off and really need a tune
so where is the best place you darwin guys think?
was thinking peckys or hi tech

poohkies · 13-07-04, 14:39

what cam did u get, was told the standard computer can't run a upgraded cam properly, might just be bull **** but that's what i was told,

take it to Pecky's

HEADAKE · 13-07-04, 15:57

from wat the guy i brought it off its a stage 2 crow? or something to same extent
have you taken yorur car to peckys?

poohkies · 13-07-04, 16:38

nar, as soon as it's finished i will. Was he runing a standard computer?

HEADAKE · 13-07-04, 16:41

na he had mirco tech
but fingers crossed i should have chip touqe comp soon might help me out a bit

poohkies · 15-07-04, 16:37

mmmm not really, cause u will need to get it tuned, as long as a place can tune it for u!

HEADAKE · 15-07-04, 16:41

peckys can tune chip touqe and so can daves at hi tech!

poohkies · 21-07-04, 15:24

cool, didn't know! so where did u take it then, how's it the new head going, u going to buy my high flow yet?

HEADAKE · 21-07-04, 15:29

mate havent got it tuned yet! thinkin peckys!
its got bit more get up n go

poohkies · 22-07-04, 10:19

hope it can do better than a 16 :P now

it's it running okies, not missing coughing farting etc?

HEADAKE · 22-07-04, 16:00

with no tune has miss on idle and runs rich
but its got bit more power.
these cold nites have been nice

poohkies · 22-07-04, 16:05

yeah i bet, buy the time i get my ***in ****ter going it will be the wet session, will not be able to handel it in the wet and either run up a gutter or hit a power pole, can hardly wait!

HEADAKE · 22-07-04, 16:08

why is yours not running?

poohkies · 04-08-04, 11:38

still havn't got the engine in, should be getting a gear box this weekend, hopefully have another $10 g to spend on it, getting full roll cage etc, nissan brakes injectors and either water to air or fmic, and maybe a t66 depending, u still want my high flow ? comeon buy it so i can get the t66

HEADAKE · 04-08-04, 19:23

mate if i had the spare $$ i would but headin to bali in few weeks so you know!!! would be nice tho!! i'll keep my eye on my funds! got my cooler on and should get my last pipe made up this week or next just gotta figure out how to get my front bar around it now

poohkies · 05-08-04, 14:12

Working at Petrol Plus at Cas, stop past and show us, or come around on the weekend

HEADAKE · 10-08-04, 15:22

what times you work u do day shifts or night shifts?

poohkies · 10-08-04, 16:17

night shift's normally, working tues wed frid night this week

HEADAKE · 10-08-04, 18:42

i'll haveto drop in! i ownly work nights so i drop passed after work
got qoute from tpl for my pipes 200bucks not bad hey

poohkies · 11-08-04, 13:07

TPL ???? pipes what for ???
more info bro!

HEADAKE · 11-08-04, 17:19

TPL exaust are goin to make the pipe for my intercooler they are goin to charge me 200 bucks for it

HEADAKE · 19-02-05, 22:12

revitup??? wheres this mate
ah and welcome to the forum... good to see more nt boys
email a pic of ya ride if you got one too
b.treloar@aerocare.com.au

Stable · 20-02-05, 04:02

In Pruen road behind truck city. Theres a sign out the front.
I dont have a decent pic on this comp, Ill get one soon.

07-07-04, 14:33	#1
HEADAKE Player Join Date: 04-03-04 Location: Darwin, alawa Car: WHITE FAKENSHAW VL TURBO Trader Rating: (0)	Where Do U Darwin Guys Get A Tune???? i just put my new head on wif diffrent cam in it and my cooler will be on soon but my timming is off and really need a tune so where is the best place you darwin guys think? was thinking peckys or hi tech

13-07-04, 16:38	#4
poohkies no it's a calais not a vl Join Date: 29-05-03 Location: Brisbane, Kenmore Car: VL Calais Turbo,Autech 260rs, GT Spec B Liberty wagon, R33 4 door daily Trader Rating: (18)	nar, as soon as it's finished i will. Was he runing a standard computer? .

13-07-04, 14:39	#2
poohkies no it's a calais not a vl Join Date: 29-05-03 Location: Brisbane, Kenmore Car: VL Calais Turbo,Autech 260rs, GT Spec B Liberty wagon, R33 4 door daily Trader Rating: (18)	what cam did u get, was told the standard computer can't run a upgraded cam properly, might just be bull **** but that's what i was told, take it to Pecky's

13-07-04, 15:57	#3
HEADAKE Player Join Date: 04-03-04 Location: Darwin, alawa Car: WHITE FAKENSHAW VL TURBO Trader Rating: (0)	from wat the guy i brought it off its a stage 2 crow? or something to same extent have you taken yorur car to peckys?

13-07-04, 16:41	#5
HEADAKE Player Join Date: 04-03-04 Location: Darwin, alawa Car: WHITE FAKENSHAW VL TURBO Trader Rating: (0)	na he had mirco tech but fingers crossed i should have chip touqe comp soon might help me out a bit

15-07-04, 16:37	#6
poohkies no it's a calais not a vl Join Date: 29-05-03 Location: Brisbane, Kenmore Car: VL Calais Turbo,Autech 260rs, GT Spec B Liberty wagon, R33 4 door daily Trader Rating: (18)	mmmm not really, cause u will need to get it tuned, as long as a place can tune it for u!

15-07-04, 16:41	#7
HEADAKE Player Join Date: 04-03-04 Location: Darwin, alawa Car: WHITE FAKENSHAW VL TURBO Trader Rating: (0)	peckys can tune chip touqe and so can daves at hi tech!

21-07-04, 15:24	#8
poohkies no it's a calais not a vl Join Date: 29-05-03 Location: Brisbane, Kenmore Car: VL Calais Turbo,Autech 260rs, GT Spec B Liberty wagon, R33 4 door daily Trader Rating: (18)	cool, didn't know! so where did u take it then, how's it the new head going, u going to buy my high flow yet?

21-07-04, 15:29	#9
HEADAKE Player Join Date: 04-03-04 Location: Darwin, alawa Car: WHITE FAKENSHAW VL TURBO Trader Rating: (0)	mate havent got it tuned yet! thinkin peckys! its got bit more get up n go

22-07-04, 10:19	#10
poohkies no it's a calais not a vl Join Date: 29-05-03 Location: Brisbane, Kenmore Car: VL Calais Turbo,Autech 260rs, GT Spec B Liberty wagon, R33 4 door daily Trader Rating: (18)	hope it can do better than a 16 :P now it's it running okies, not missing coughing farting etc?

22-07-04, 16:00	#11
HEADAKE Player Join Date: 04-03-04 Location: Darwin, alawa Car: WHITE FAKENSHAW VL TURBO Trader Rating: (0)	with no tune has miss on idle and runs rich but its got bit more power. these cold nites have been nice

22-07-04, 16:05	#12
poohkies no it's a calais not a vl Join Date: 29-05-03 Location: Brisbane, Kenmore Car: VL Calais Turbo,Autech 260rs, GT Spec B Liberty wagon, R33 4 door daily Trader Rating: (18)	yeah i bet, buy the time i get my *in **ter going it will be the wet session, will not be able to handel it in the wet and either run up a gutter or hit a power pole, can hardly wait!

22-07-04, 16:08	#13
HEADAKE Player Join Date: 04-03-04 Location: Darwin, alawa Car: WHITE FAKENSHAW VL TURBO Trader Rating: (0)	why is yours not running?

04-08-04, 11:38	#14
poohkies no it's a calais not a vl Join Date: 29-05-03 Location: Brisbane, Kenmore Car: VL Calais Turbo,Autech 260rs, GT Spec B Liberty wagon, R33 4 door daily Trader Rating: (18)	still havn't got the engine in, should be getting a gear box this weekend, hopefully have another $10 g to spend on it, getting full roll cage etc, nissan brakes injectors and either water to air or fmic, and maybe a t66 depending, u still want my high flow ? comeon buy it so i can get the t66

04-08-04, 19:23	#15
HEADAKE Player Join Date: 04-03-04 Location: Darwin, alawa Car: WHITE FAKENSHAW VL TURBO Trader Rating: (0)	mate if i had the spare $$ i would but headin to bali in few weeks so you know!!! would be nice tho!! i'll keep my eye on my funds! got my cooler on and should get my last pipe made up this week or next just gotta figure out how to get my front bar around it now

05-08-04, 14:12	#16
poohkies no it's a calais not a vl Join Date: 29-05-03 Location: Brisbane, Kenmore Car: VL Calais Turbo,Autech 260rs, GT Spec B Liberty wagon, R33 4 door daily Trader Rating: (18)	Working at Petrol Plus at Cas, stop past and show us, or come around on the weekend

10-08-04, 15:22	#17
HEADAKE Player Join Date: 04-03-04 Location: Darwin, alawa Car: WHITE FAKENSHAW VL TURBO Trader Rating: (0)	what times you work u do day shifts or night shifts?

10-08-04, 16:17	#18
poohkies no it's a calais not a vl Join Date: 29-05-03 Location: Brisbane, Kenmore Car: VL Calais Turbo,Autech 260rs, GT Spec B Liberty wagon, R33 4 door daily Trader Rating: (18)	night shift's normally, working tues wed frid night this week

10-08-04, 18:42	#19
HEADAKE Player Join Date: 04-03-04 Location: Darwin, alawa Car: WHITE FAKENSHAW VL TURBO Trader Rating: (0)	i'll haveto drop in! i ownly work nights so i drop passed after work got qoute from tpl for my pipes 200bucks not bad hey

11-08-04, 13:07	#20
poohkies no it's a calais not a vl Join Date: 29-05-03 Location: Brisbane, Kenmore Car: VL Calais Turbo,Autech 260rs, GT Spec B Liberty wagon, R33 4 door daily Trader Rating: (18)	TPL ???? pipes what for ??? more info bro!

11-08-04, 17:19	#21
HEADAKE Player Join Date: 04-03-04 Location: Darwin, alawa Car: WHITE FAKENSHAW VL TURBO Trader Rating: (0)	TPL exaust are goin to make the pipe for my intercooler they are goin to charge me 200 bucks for it

19-02-05, 22:12	#22
HEADAKE Player Join Date: 04-03-04 Location: Darwin, alawa Car: WHITE FAKENSHAW VL TURBO Trader Rating: (0)	revitup??? wheres this mate ah and welcome to the forum... good to see more nt boys email a pic of ya ride if you got one too b.treloar@aerocare.com.au

20-02-05, 04:02	#23
Stable Player Join Date: 19-02-05 Location: NT, Darwin Car: '87 VL Calais V8 Trader Rating: (0)	In Pruen road behind truck city. Theres a sign out the front. I dont have a decent pic on this comp, Ill get one soon.